ProIndicatr Pro: 4 Pro indicators
indicator.trading
All scripts

Pro · Invite-only

Momentum Cross Pro

The classic trend-following cross – filtered, visible and with a clear plan for every trade.

Type
Trend following + signals + trade simulator
Direction
Long and short
Recommended
Daily chart, 4h
Markets
Markets with long trends
Open chart on TradingView
Momentum Cross Pro on Bitcoin on the 4-hour chart with a glowing trend line, trend cloud, traffic-light candles, EMA 200, signals and dashboard
Momentum Cross Pro on Bitcoin on the 4-hour chart with a glowing trend line, trend cloud, traffic-light candles, EMA 200, signals and dashboard

Momentum Cross Pro turns the well-known trend-following signal into a complete process: three Supertrends with different settings (or a fast and a slow average) determine the momentum, a long-term average decides which side you’re allowed to trade, and every signal is tracked with a stop, three targets and breakeven. A comparison in the dashboard shows how common settings would have performed on your chart with the same rules. This page explains every feature – and above all, what you do with it and why.

Overview

At a glance

What does it do?

It shows when short- and medium-term momentum turn in the same direction – and whether the big trend allows it.

What do I do with it?

You enter with the trend when all the lights are green (or red), and you sit out the gray phases.

Why?

Trends often last longer than you’d think. If you get in early with the momentum and get out consistently, you catch the big moves.

What do I get?

Clear rules instead of gut feeling: you see at a glance where a trade is allowed and where it isn’t.

On your chart in 3 minutes

Quickstart

  1. 01

    Get access

    Momentum Cross Pro is an invite-only script. You get access through the script page on TradingView.

  2. 02

    Add it to your chart

    At the top of the chart, click Indicators, choose Invite-only on the left and click Momentum Cross Pro.

  3. 03

    Pick a market and timeframe

    Start with a market that forms long trends, for example gold, Apple or Bitcoin, ideally on the daily chart or on 4h.

  4. 04

    Read the status line

    The top of the dashboard tells you what’s going on right now – for example “SHORT READY · entry on next cross” or “NO SETUP · Supertrends not aligned”.

Once you have access, all Pro scripts are under Indicators → Invite-only.
TradingView “Indicators, metrics, and strategies” window with the list of Indicatr invite-only scripts
TradingView “Indicators, metrics, and strategies” window with the list of Indicatr invite-only scripts

The chart explained

What you see on the chart

Bitcoin, 4h. The numbers match the list below.Open chart on TradingView
All elements of Momentum Cross Pro on the chart, numbered
All elements of Momentum Cross Pro on the chart, numbered
  1. 1Trend line Red or green when all Supertrends agree, gray when they don’t.
  2. 2Trend cloud The space between the trend line and price in a running trend.
  3. 3Traffic-light candles Gray as long as an entry is blocked.
  4. 4EMA 200 The long-term filter with a name tag.
  5. 5SELL Short signal on the confirmed candle.
  6. 6BUY Long signal on the confirmed candle.
  7. 7Dashboard Status, checklist, statistics and comparison.

Elements 1 and 2

Trend line and trend cloud

What does it do?

The glowing line follows the slowest of the three Supertrends. It’s green or red as long as all three point in the same direction, and gray as soon as they disagree. The cloud fills the space up to price.

What do I do with it?

As long as the line and the cloud are colored, the trend is running. When the line turns gray, momentum is split – time for caution, not for new entries.

Why?

A fast Supertrend reacts early, a slow one confirms. Only when both agree do short- and medium-term participants share the same direction.

What do I get?

A calm view of the trend: you see its direction, its strength (the distance to the line) and the moment it starts to wobble.

Elements 3 and 4

Traffic-light candles and long-term filter

The candles only take on the trend color as long as all filters are met. When they turn gray, the script wouldn’t open a new trade there – either because the Supertrends disagree or because price is on the wrong side of the EMA 200 (longs only above it, shorts only below it).

Elements 5 and 6

BUY and SELL signals

A BUY appears when the Supertrends turn up together on the same candle – all three, or two of three if you set it that way – and price is above the EMA 200. A SELL appears as the mirror image. Alternatively, the cross of two averages can deliver the signal instead of the Supertrends. Signals only form on finished candles and don’t disappear afterwards.

The status line tells you in advance what’s holding things up: “LONG READY · entry on next cross” means all filters fit and the next turn triggers the signal. “LONG BLOCKED · below EMA 200” or “NO SETUP · Supertrends not aligned” name the missing condition.

Before you take a signal

  • Has the market been trending over the last few weeks – or is it swinging sideways?
  • Are there important events coming up? Central banks, jobs data, inflation, and for stocks the earnings reports.
  • Is there a big level right in front of you – an older high or low, a round number?
  • What are the related markets doing? For gold the dollar and real yields, for stocks the bond yields, for Bitcoin the risk sentiment.
  • Does the stop distance fit your risk? That’s what you base your position size on.

Trade management

Entry, stop and targets

Gold, daily chart. An open short with the stop above and three targets below.Open chart on TradingView
Open short on gold on the daily chart with entry, stop, TP1 with breakeven, TP2 and TP3
Open short on gold on the daily chart with entry, stop, TP1 with breakeven, TP2 and TP3
  • Entry: the close of the signal candle.
  • Stop: by default a fixed distance based on volatility (1.5 × ATR). Alternatively behind the structure, behind the furthest of the agreeing Supertrends, at the slow average, as an ATR trail or in percent.
  • TP1, TP2, TP3: at 1, 2 and 3 times the risk (R). The position is split evenly across the targets.
  • Breakeven at TP1: from the first target on, the rest can no longer go negative.

Element 7

Reading the dashboard

Bitcoin, 4h. The short is ready and waiting for the next turn.Open chart on TradingView
Momentum Cross Pro dashboard with status, checklist, market, statistics, target hit rate, last trades and settings comparison
Momentum Cross Pro dashboard with status, checklist, market, statistics, target hit rate, last trades and settings comparison
SectionWhat it tells you
Status lineREADY, BLOCKED with the reason, NO SETUP – or, with an open trade, the direction and the result in R.
ChecklistDirection of the Supertrends, side of the EMA 200, trend phase, momentum, ATR trend and session.
MarketHow many Supertrends point up, distance to the EMA 200 in ATR, direction of the ATR trailing stop, momentum.
Open tradeEntry, current stop, next target. If momentum turns against your trade, a warning appears.
StatisticsTrades, win rate, result in R and profit factor in the evaluation window (default: last 1,000 candles).
Target hit rate / Last tradesHow often the targets were reached and how the last trades ended.
Settings comparisonEight common EMA pairs and three Supertrend sets with exactly the same rules. The best one is marked with ★.

Recommendations

Which markets fit – and which don’t

We tested Momentum Cross Pro with default settings on 11 markets and three timeframes, each over up to 20,000 candles. The pattern is clear: trend following needs markets with long, steady trends – and more time per candle. The daily chart was better than the smaller timeframes almost everywhere.

Market1h4hDailyWhy
Gold (XAU/USD)Long, macro-driven trends lasting months. On the daily chart, the strongest market in the test.
Apple––Large stock with a steady, long uptrend and few sharp reversals.
Bitcoin (BTC/USDT)–Strong trend phases in both directions. In between, long sideways phases – and they cost money.
NVIDIA–Strong trends carried by capital flows. Earnings reports cause gaps.
Nasdaq 100 future (NQ)–Solid on the daily chart. On 4h, too many short pullbacks that flip the signal.
S&P 500 (ETF SPY)Intraday, indices often revert to the middle. Only on the daily chart do the trends come through.
S&P 500 future (ES)––Like SPY, plus the thin night session.
Crude oil (WTI)––Clear trend phases, but inventory data and OPEC news cause jumps.
EUR/USD––Very liquid, but a lot of back and forth on 4h. Trends here develop over weeks, not hours.
DAX future––Many reversals in the afternoon due to US data. No edge on 4h.
GBP/NZD–Thin cross pair with long sideways phases and sudden spikes. Signals pile up in the range and get stopped out.

Basis: our own test with default settings, up to 20,000 candles per market, without costs. ●●● strong, ●●○ solid, ●○○ weak, – not tested. The reasons are our assessment of each market’s characteristics.

Good example: gold on the daily chart

Gold, daily chart. The big uptrend with a few clear signals – then the trend line turns, and shorts take over.Open chart on TradingView
Momentum Cross Pro on gold on the daily chart: a long uptrend with BUY signals, followed by a downtrend phase with SELL signals
Momentum Cross Pro on gold on the daily chart: a long uptrend with BUY signals, followed by a downtrend phase with SELL signals

Gold

daily chart

Good fit
  • Long trends: gold moves in one direction for months, driven by the dollar, real yields and central bank buying.
  • Few but big trades: on the daily chart, there are only a handful of signals per year – but they carry.
  • Over up to 20,000 candles, the profit factor on the daily chart was just under 2.

Apple and large stocks

daily chart

Good fit
  • Large, liquid stocks follow long-term capital flows and form steady trends.
  • On the daily chart, the signal isn’t thrown off by short fluctuations.
  • Tip: don’t open a new trade ahead of earnings reports – gaps can jump over the stop.

Bad example: GBP/NZD

GBP/NZD, 4h. In October, BUY signals pile up in a sideways phase – three of the last five trades ended at the stop.Open chart on TradingView
Momentum Cross Pro on GBP/NZD on the 4-hour chart with clustered BUY signals in a sideways phase
Momentum Cross Pro on GBP/NZD on the 4-hour chart with clustered BUY signals in a sideways phase

GBP/NZD

4h and daily chart

Poor fit
  • Sideways instead of trending: the pair often swings back and forth for weeks. Every turn of the Supertrends produces a signal there – and a stop.
  • Two central banks and a commodity currency pull in different directions. Short spikes trigger signals that don’t carry.
  • Thin and expensive: with many trades, wide spreads eat a large part of the result. The costs aren’t even included in the statistics.

Stock indices intraday

S&P 500, Nasdaq, DAX on 1h and 4h

Use with care
  • Within a few days, indices often revert to the middle. A momentum signal on 4h then turns too early.
  • On the daily chart, it looks a lot better.
  • The lesson: the same market can fit on one timeframe and not on another.

Which timeframe?

  • Daily chart: the best almost everywhere. Few signals, big trends, costs hardly matter.
  • 4h: good on gold, Bitcoin, NVIDIA and oil. Weak on indices and the major currency pairs.
  • 1h: many trades, a small edge – fees and spread eat it up quickly.

Both directions

Long and short

Momentum Cross Pro trades both directions with the same rules. The Bitcoin example above shows a downtrend phase: the trend line is red, the SELL signals follow the downtrend, and the gray candles in between show the moments when a new entry was blocked.

The part that makes the difference

How to manage the trades

Before the entry

  • Trend or range? If BUY and SELL keep alternating over the last few weeks, the market is moving sideways. Then you pause or turn on the range filter.
  • Check the calendar. No new trades ahead of big events. A data shock flips the Supertrends faster than you’d like.
  • Check intermarket. If the dollar, interest rates or risk sentiment run against your signal, the trend is weaker.
  • Calculate your position size from the stop – always the same risk per trade.

While the trade is running

  • Breakeven after TP1 is the default. From then on, the worst case is that the trade ends flat.
  • Take the dashboard warning seriously: if momentum turns against the trade, that’s the moment to actively review it.
  • Let winners run. Trend following makes its money on a few big moves. A trailing stop can help you capture more of them.

Over weeks and months

  • Losing streaks are part of it. In sideways phases, several stops come in a row. If you switch methods then, you miss the next trend.
  • Spread across markets. Trend following works best across several independent markets – there’s almost always a trend running somewhere.

Don’t miss a thing

Setting up alerts

  1. 01

    Open the alert window

    At the top of the chart, click Alert or press Alt + A.

  2. 02

    Choose the condition

    Under Condition, select Momentum Cross Pro and below it the alert you want.

  3. 03

    Trigger

    For signals, use “Once per bar close” so the alert only fires on the finished candle.

  4. 04

    Notification

    Choose app, email or webhook and save.

AlertWhen it fires
Buy / Sell / Buy or sellNew signal on the finished candle, with stop and targets in the message.
TP1 / TP2 / TP3As soon as price touches a target.
Stop hit / Stop moved to breakeven / Stop movedThe stop was hit, moved to the entry or trailed.
Momentum shift up / downMomentum is turning – an early warning, not a signal yet.
Best setting changedA different variant is now ahead in the settings comparison.
Any alert() function callOne alert for everything: the entry with all levels and, if enabled, every target, every stop and every breakeven.

Reference

All settings

Double-click the name “MCP” at the top left of the chart to open the settings. They’re split into ten groups. Most traders only change groups 1 to 4.

1 · Signals

Settings group 1: Signals
Settings group 1: Signals
Signal engineDefault: Triple Supertrend
Triple Supertrend: a signal when the Supertrends turn together. MA cross: a signal when the fast average crosses the slow one.
MA type / Fast MA / Slow MADefault: EMA / 9 / 21
Only for “MA cross”: type and length of the two averages. There are eight types to choose from.
Supertrend 1–3Default: 10×1 / 11×2 / 12×3
The three Supertrends from fast to slow. The defaults are proven – only change them with an eye on the settings comparison.
Supertrends that must agreeDefault: All 3
All 3: fewer but confirmed signals. 2 of 3: earlier, but more false signals.
DirectionDefault: Long & Short
Long only, short only or both.

2 · Filters

Settings group 2: Filters
Settings group 2: Filters
Long-term filterDefault: on
Longs only above, shorts only below the long-term average. Definitely keep it on.
Long-term MA type / lengthDefault: EMA / 200
Type and length of the long-term average.
Range filterDefault: Off
Hides signals in sideways phases. Off by default, because it removes the earliest entries of a trend.
Momentum confirmationDefault: off
Also requires momentum on the same side.
Sessions and weekdaysDefault: off / all
Signals only during certain trading hours or on certain days.

3 · Stop & Targets

Settings group 3: Stop & Targets
Settings group 3: Stop & Targets
Stop modelDefault: ATR fixed
ATR fixed: a fixed distance based on volatility (default). Alternatively ATR trail, structure, Supertrend, slow average or percent.
ATR fixed stopDefault: 1.5
Distance in multiples of the average candle size.
Structure lookback / Stop bufferDefault: 10 / 0.5
For the structure-based models: lookback and buffer behind the level.
Minimum / Maximum stopDefault: 1 / off
Limits for the stop distance in ATR for level-based stops.
TP1 / TP2 / TP3Default: 1R / 2R / 3R
Targets in multiples of the risk; each one can be turned off.

4 · Trade Management

Settings group 4: Trade Management
Settings group 4: Trade Management
Move stop to breakevenDefault: At TP1
When the stop moves to the entry.
Trailing stopDefault: Off
Trailing by ATR, percent or 1R from the high. Useful in clean trends.
ATR trail lookback / multiplierDefault: 22 / 3
Shape of the ATR trailing stop (also used for the ATR trend in the dashboard).

5 · Chart

Settings group 5: Chart
Settings group 5: Chart
StyleDefault: Glow
Glowing or plain display.
Moving averages with cloudDefault: on
Show or hide the trend cloud.
Supertrend displayDefault: Trend line
One trend line, all three lines or none.
Long-term MA / ATR trailing stop lineDefault: on / off
The long-term average and, optionally, the ATR trailing line.
Candle colouringDefault: Traffic light
Traffic light: gray when an entry is blocked. Trend: trend color only. Off: normal candles.

6 · Trade Display

Settings group 6: Trade Display
Settings group 6: Trade Display
Show trade levelsDefault: on
Entry, stop and targets on the chart.
Keep closed trades on chartDefault: off
Keep closed trades visible – good for studying, but fills up the chart quickly.
Line style / Label size / Prices / ZonesDefault: Dashed / Normal / on / on
How the lines, labels and zones look.

7 · Dashboard

Settings group 7: Dashboard
Settings group 7: Dashboard
Theme / Position / Text sizeDefault: Auto / Top right / Small
“Auto” adapts to a light or dark chart.
Statistics / Target hit rate / Last tradesDefault: on
Show or hide individual sections.
Settings comparison / Rows shownDefault: on / 4
The settings comparison and how many rows it shows.

8 · Trade History

Settings group 8: Trade History
Settings group 8: Trade History
Show trade historyDefault: off
An extra table with the most recent closed trades and a small equity curve.

9 · Evaluation

Settings group 9: Evaluation
Settings group 9: Evaluation
Evaluation windowDefault: Last N bars
The statistics over the last N candles or from a start date.
BarsDefault: 1000
When choosing a market, set it to 10,000 or more – only then do you have enough trades to draw a conclusion.

10 · Alerts

Settings group 10: Alerts
Settings group 10: Alerts
“Any alert() function call” also reports exitsDefault: on
The combined alert also reports every target, every stop and every breakeven.

From practice

Common mistakes

  • Trend following in sideways phases. If the signals keep alternating, there’s no trend – only costs.
  • Timeframes that are too small. The smaller the timeframe, the more trades, the more costs and the smaller the edge.
  • Ignoring gray candles. They show that momentum or the big trend isn’t playing along.
  • Chasing the star. The setting that’s best right now often isn’t the best one tomorrow.
  • Closing winners too early. Trend following lives on the few big moves.
  • Overrating the statistics of the last 1,000 candles. To draw a conclusion, you need a lot more trades.

FAQ

Does Momentum Cross Pro repaint?

No. Signals and entries only form on finished candles and don’t change afterwards. Only the dashboard and the levels of the open trade update live.

Which is better: Triple Supertrend or MA cross?

Triple Supertrend is the default because it checks short- and medium-term momentum together. Whether an EMA pair fits your market better is shown by the settings comparison in the dashboard – with exactly the same rules.

Why is the range filter off by default?

Because crosses often form at the start of a trend, when trend strength is still low. A range filter would remove exactly these early entries. On markets with a lot of sideways phases, it can make sense.

Why are the candles gray?

Because a filter is blocking a new entry: the Supertrends disagree, or price is on the wrong side of the EMA 200.

The indicator is suddenly on its own scale. What do I do?

That happens if you accidentally drag it away from price. Right-click the price scale → “Merge all scales into one” attaches it again.

Which timeframe is best?

In the test, the daily chart was the strongest almost everywhere. On 4h, it works mainly on gold, Bitcoin, NVIDIA and oil.

How do I get access?

Momentum Cross Pro is an invite-only script on TradingView. The button on this page takes you to the script page. Once access is granted, you’ll find it on the chart under Indicators → Invite-only.

How do you like Momentum Cross Pro?

Your vote tells us what to work on next.

Support

Report a problem or share feedback

Something off with the script, unclear in the docs, or you have an idea? Write to us. We reply by email.

Helps us check access or settings.

Only used to reply to you.

What is it about?

By sending, you agree that we use your details to handle your request. More in our privacy policy.

Momentum Cross Pro

The classic trend-following cross with filters: three Supertrends or two averages, only in trending phases.

Get Pro access

For educational and analytical purposes only. Not financial advice. Signals, levels and statistics are not recommendations to buy or sell. All statistics are hypothetical, calculated on historical prices without fees, spread and slippage; past results are no guarantee of future results. Trading involves a risk of loss.

Momentum Cross Pro – Documentation & Guide | indicator.trading